

    (************************************)
    (*   Never edit options files when  *)
    (*       the daemon is running      *)
    (************************************)
    (* SECTION : Main *)
    (* Main options *)
    (************************************)



	(* small name of client *)
 client_name = uubehs


    (************************************)
    (* SECTION : Interfaces *)
    (* Options to control ports used by mldonkey interfaces *)
    (************************************)



	(* list of IP address allowed to connect to the core via telnet/GUI/WEB
	  for internal command set: list separated by spaces
	  example for internal command: set allowed_ips "127.0.0.0/8 192.168.1.2"
	  or for editing the ini-file: list separated by semi-colon
	  example for ini-file: allowed_ips = [ "127.0.0.0/8"; "192.168.1.2";]
	  CIDR and range notations are supported: ie use 192.168.0.0/24
	  or 192.168.0.0-192.168.0.255 for 192.168.0.* *)
 allowed_ips = [
  "127.0.0.1";]

	(* port for Graphical Interfaces, 0 to deactivate GUI interface *)
	(* changing this option requires restart of MLDonkey core *)
 gui_port = 4001

	(* port for GiFT Graphical Interfaces interaction. It was 1213, but the default is
	  now 0 for disabled, because it does not check for a password. *)
	(* changing this option requires restart of MLDonkey core *)
 gift_port = 0

	(* The port used to connect to your client with a web browser, 0 to deactivate web interface *)
	(* changing this option requires restart of MLDonkey core *)
 http_port = 4080

	(* port for user interaction, 0 to deactivate telnet interface *)
	(* changing this option requires restart of MLDonkey core *)
 telnet_port = 4000

	(* Aliases to commands. The alias (fist string) has to be
	  whitespaceless, the outcome of the alias (second string)
	  may have spaces (put it in quotation then). *)
 alias_commands = [
  (quit, q);
  (exit, q);]

	(* upnp port forwarding *)
	(* changing this option requires restart of MLDonkey core *)
 upnp_port_forwarding = false

	(* clear all upnp port forwarding before mldonkey exit *)
 clear_upnp_port_at_exit = true


    (************************************)
    (* SECTION : Bandwidth *)
    (* Bandwidth options *)
    (************************************)



	(* The maximal upload rate you can tolerate on your link in kBytes/s (0 = no limit)
	  The limit will apply on all your connections (clients and servers) and both
	  control and data messages. *)
 max_hard_upload_rate = 10

	(* The maximal download rate you can tolerate on your link in kBytes/s (0 = no limit)
	  The limit will apply on all your connections (clients and servers) and both
	  control and data messages. Maximum value depends on max_hard_upload_rate:
	  >= 10    -> unlimited download
	  < 10 > 3 -> download limited to upload * 4
	  < 4      -> download limited to upload * 3 *)
 max_hard_download_rate = 50

	(* Second maximal upload rate for easy toggling (use bw_toggle) *)
 max_hard_upload_rate_2 = 5

	(* Second maximal download rate for easy toggling (use bw_toggle) *)
 max_hard_download_rate_2 = 20

	(* Maximal number of opened connections *)
 max_opened_connections = 200

	(* Second maximal number of opened connections for easy toggling (use bw_toggle) *)
 max_opened_connections_2 = 100

	(* Amount of indirect connections in percent (min 30, max 70) of max_opened_connections *)
 max_indirect_connections = 30

	(* How many slots can be used for upload, minimum 3 *)
 max_upload_slots = 5

	(* How many percent of upload slots can be used for downloading files
	  tagged as release, maximum 75% *)
 max_release_slots = 20

	(* Set aside a single reserved slot to upload to friends *)
 friends_upload_slot = true

	(* Maximum file size to benefit from the reserved slot for small files (0 to disable) *)
 small_files_slot_limit = 10240

	(* Set this to true if you want to have dynamic upload slot allocation (experimental) *)
 dynamic_slots = false

	(* Maximal number of connections that can be opened per second *)
 max_connections_per_second = 5

	(* list of IP addresses allowed to connect to the core with no limit on
	  upload/download and upload slots.  List separated by spaces, wildcard=255
	  ie: use 192.168.0.255 for 192.168.0.*  *)
 nolimit_ips = [
  "127.0.0.1";]

	(* This option enables MLdonkey to always read as much data as possible
	  from a channel, but use more CPU as it must then copy the data in the
	  channel buffer. *)
 copy_read_buffer = true


    (************************************)
    (* SECTION : Networks *)
    (* Networks options *)
    (************************************)



	(* Set to true if you also want mldonkey to run as an overnet client
	  (enable_donkey must be true) *)
 enable_overnet = false

	(* Set to true if you also want mldonkey to run as an kademlia client
	  (enable_donkey must be true, and only experimental) *)
 enable_kademlia = false

	(* Set to true if you want mldonkey to connect to edonkey servers
	  (enable_donkey must be true, and only experimental) *)
 enable_servers = true

	(* Set to true if you also want mldonkey to run as an Bittorrent client *)
 enable_bittorrent = true

	(* Set to true if you also want mldonkey to run as a donkey client *)
 enable_donkey = true

	(* Set to true if you also want mldonkey to run as a napster client (experimental) *)
 enable_opennap = false

	(* Set to true if you also want mldonkey to run as a soulseek client (experimental) *)
 enable_soulseek = false

	(* Set to true if you also want mldonkey to run as a gnutella1 sub node (experimental) *)
 enable_gnutella = false

	(* Set to true if you also want mldonkey to run as a gnutella2 sub node (experimental) *)
 enable_gnutella2 = false

	(* Set to true if you also want mldonkey to run as a Fasttrack sub node (experimental) *)
 enable_fasttrack = false

	(* Set to true if you also want mldonkey to run as a direct-connect node (experimental) *)
 enable_directconnect = false

	(* Set to true if you also want mldonkey to download HTTP files (experimental) *)
 enable_fileTP = true


    (************************************)
    (* SECTION : Network Config *)
    (* Network config options *)
    (************************************)



	(* The last IP address used for this client *)
 client_ip = "192.168.0.11"

	(* Use the IP specified by 'client_ip' instead of trying to determine it
	  ourself. Don't set this option to true if you have dynamic IP. *)
 force_client_ip = false

	(* Use http://ip.discoveryvip.com/ip.asp to obtain WAN IP *)
 discover_ip = true

	(* User agent string (default = "default") *)
 user_agent = default

	(* A list of lines to download on the WEB: each line has
	  the format: (kind, period, url), where kind is either
	  'server.met' for a server.met file (also in gz/bz2/zip format)
	               containing ed2k server, or
	  'comments.met' for a file of comments, or
	  'guarding.p2p' for a blocklist file (also in gz/bz2/zip format), or
	  'ocl' for file in the ocl format containing overnet peers, or
	  'contact.dat' for an contact.dat file containing overnet peers,
	  'nodes.gzip' for a fasttrack nodes.gzip,
	  'hublist' for DirectConnect hubs list,
	  and period is the period between updates (in hours),
	  a period of zero means the file is only loaded once on startup,
	  and url is the url of the file to download.
	  IMPORTANT: Put the URL and the kind between quotes.
	  EXAMPLE:
	    web_infos = [
	    ("server.met", 0, "http://www.gruk.org/server.met.gz");
	    ("hublist", 0, "http://dchublist.com/hublist.xml.bz2");
	    ("guarding.p2p", 96, "http://www.bluetack.co.uk/config/level1.gz");
	    ("ocl", 24, "http://members.lycos.co.uk/appbyhp2/FlockHelpApp/contact-files/contact.ocl");
	    ("contact.dat", 168, "http://download.overnet.org/contact.dat");
	    ("geoip.dat", 168, "http://www.maxmind.com/download/geoip/database/GeoLiteCountry/GeoIP.dat.gz");
	    ]
	   *)
 web_infos = [
  ("geoip.dat", 0, "http://www.maxmind.com/download/geoip/database/GeoLiteCountry/GeoIP.dat.gz");
  ("server.met", 0, "http://www.gruk.org/server.met.gz");
  ("guarding.p2p", 96, "http://www.bluetack.co.uk/config/level1.gz");
  (hublist, 0, "http://dchublist.com/hublist.config.bz2");
  ("nodes.gzip", 0, "http://update.kceasy.com/update/fasttrack/nodes.gzip");]

	(* Cookies send with a http request (used for .torrent files and web_infos) *)
 referers = [
  (".*suprnova.*", "http://www.suprnova.org/");]

	(* Cookies send with a http request (used for .torrent files and web_infos) *)
 cookies = []

	(* Direct HTTP queries to HTTP proxy *)
 http_proxy_server = ""

	(* Port of HTTP proxy *)
 http_proxy_port = 8080

	(* HTTP proxy login (leave empty if proxy doesn't require authentication) *)
 http_proxy_login = ""

	(* HTTP proxy password *)
 http_proxy_password = ""

	(* Direct TCP connections to HTTP proxy (the proxy should support CONNECT) *)
 http_proxy_tcp = false


    (************************************)
    (* SECTION : HTML mods *)
    (* Options to configure HTML mode *)
    (************************************)



	(* bw_stats refresh delay (seconds) *)
 html_mods_bw_refresh_delay = 11

	(* html_mods_theme to use (located in relative html_themes/<theme_name> directory
	  leave blank to use internal theme *)
 html_mods_theme = ""


    (************************************)
    (* SECTION : Download *)
    (* Download options *)
    (************************************)



	(* Set to false if you don't want mldonkey to automatically put completed files
	  in incoming directory *)
 auto_commit = true

	(* Set to true if you want all new downloads be paused immediatly
	  will be set to false on core start. *)
 pause_new_downloads = false

	(* Set to true if you want to activate the release slot feature for all new downloads. *)
 release_new_downloads = false

	(* The maximal number of files in Downloading state (other ones are Queued) *)
 max_concurrent_downloads = 50

	(* The maximal length of zero bytes between non-zero bytes in a file that
	  should be interpreted as downloaded during a recovery *)
 max_recover_zeroes_gap = 16

	(* A command that is called when a file is committed, does not work on MinGW.
	  Arguments are (kept for compatibility):
	    $1 - temp file name, without path
	    $2 - file size
	    $3 - filename of the committed file
	  Also these environment variables can be used (preferred way):
	    $TEMPNAME  - temp file name, including path
	    $FILEID    - same as $1
	    $FILESIZE  - same as $2
	    $FILENAME  - same as $3
	    $FILEHASH  - internal hash
	    $DURATION  - download duration
	    $INCOMING  - directory used for commit
	    $NETWORK   - network used for downloading
	    $ED2K_HASH - ed2k hash if MD4 is known
	    $FILE_OWNER - user who started the download
	    $FILE_GROUP - group the file belongs to
	    $USER_MAIL - mail address of file_owner
	   *)
 file_completed_cmd = ""

	(* The command which is called when a download is started. Arguments
	  are '-file <num>'
	  Also these environment variables can be used (preferred way):
	    $TEMPNAME  - temp file name, including path
	    $FILEID    - same as $1
	    $FILESIZE  - same as $2
	    $FILENAME  - same as $3
	    $FILEHASH  - internal hash
	    $NETWORK   - network used for downloading
	    $ED2K_HASH - ed2k hash if MD4 is known
	    $FILE_OWNER - user who started the download
	    $FILE_GROUP - group the file belongs to
	    $USER_MAIL - mail address of file_owner
	   *)
 file_started_cmd = ""


    (************************************)
    (* SECTION : Startup *)
    (* Startup options *)
    (************************************)



	(* The login of the user you want mldonkey to run as, after the ports
	  have been bound (can be used not to run with root privileges when
	  a port < 1024 is needed) *)
	(* changing this option requires restart of MLDonkey core *)
 run_as_user = ""

	(* The UID of the user (0=disabled) you want mldonkey to run as, after the ports
	  have been bound (can be used not to run with root privileges when
	  a port < 1024 is needed) *)
	(* changing this option requires restart of MLDonkey core *)
 run_as_useruid = 0

	(* The group of run_as_user user to be used *)
	(* changing this option requires restart of MLDonkey core *)
 run_as_group = ""

	(* The group of run_as_user user to be used *)
	(* changing this option requires restart of MLDonkey core *)
 run_as_groupgid = 0

	(* Ask for GUI start *)
 ask_for_gui = false

	(* Automatically Start the GUI *)
 start_gui = false

	(* Should MLdonkey try to recover downloads of files in temp/ at startup *)
 recover_temp_on_startup = true


    (************************************)
    (* SECTION : Mail *)
    (* Mail options *)
    (************************************)



	(* The mail server you want to use (must be SMTP). Use hostname or IP address *)
 smtp_server = "127.0.0.1"

	(* The port to use on the mail server (default 25) *)
 smtp_port = 25

	(* Login to use for SMTP authentication (leave empty to disable). LOGIN, PLAIN and CRAM-MD5 methods are supported *)
 smtp_login = ""

	(* Password to use for SMTP authentication *)
 smtp_password = ""

	(* Email address to receive notifications when downloads are completed or disk is full (leave empty to disable, separate multiple addresses with space) *)
 mail = ""

	(* Set to false if your mail server cannot handle angle-brackets around addresses (RFC 5321) *)
 add_mail_brackets = true

	(* Send filename in mail subject *)
 filename_in_subject = true

	(* Put a prefix for the filename here which shows up in the notification mail *)
 url_in_mail = ""


    (************************************)
    (* SECTION : Paths *)
    (* Paths options *)
    (************************************)



	(* The directory where temporary files should be put *)
 temp_directory = temp

	(* How often (in minutes) should MLDonkey scan all shared directories for new/removed files.
	  Minimum 5, 0 to disable. Use command reshare to manually scan shares.
	  When core starts, shared directories are scanned once, independent of this option. *)
	(* changing this option requires restart of MLDonkey core *)
 share_scan_interval = 30

	(* New download files are created with these rights (in octal) *)
 create_file_mode = 664

	(* New directories in incoming_directories are created with these rights (in octal) *)
 create_dir_mode = 755

	(* Create new files as sparse (not supported on FAT volumes) *)
 create_file_sparse = true

	(* Mininum free space in MB on temp_directory, minimum 50 *)
 hdd_temp_minfree = 50

	(* If true core shuts down when free space on temp dir is below hdd_temp_minfree,
	  otherwise all downloads are paused and a warning email is sent. *)
 hdd_temp_stop_core = false

	(* Mininum free space in MB on core directory, minimum 20 *)
 hdd_coredir_minfree = 50

	(* If true core shuts down when free space on core dir is below hdd_coredir_minfree,
	  otherwise all downloads are paused and a warning email is sent. *)
 hdd_coredir_stop_core = true

	(* Send a warning mail each <interval> hours for each directory, 0 to deactivate mail warnings. *)
 hdd_send_warning_interval = 1

	(* Use UTF-8 for filenames (instead of automatic locale detection). *)
 filenames_utf8 = false

	(*                 Incoming and shared directories.
	   At least two entries have to be present here, one with strategy
	   incoming_files and one with strategy incoming_directories.
	   Both entries can point to the same directory.
	   If one of the two strategies is missing, MLDonkey will create a default
	   directory with its entry here.
	   Finished BT multifile downloads are committed to the first directory
	   with strategy incoming_directories. Other downloads are committed
	   to the first directory with the strategy incoming_files.
	   MLdonkey searches all shared_directories with incoming_* strategies
	   on commit and uses the first one with enough free diskspace.
	   Other strategies can be found in searches.ini, section customized_sharing. *)
 shared_directories = [
  {     dirname = shared
     strategy = all_files
     priority = 0
};
  {     dirname = "incoming\\files"
     strategy = incoming_files
     priority = 0
};
  {     dirname = "incoming\\directories"
     strategy = incoming_directories
     priority = 0
};]


    (************************************)
    (* SECTION : Security *)
    (* Security options *)
    (************************************)



	(* Commands that you are allowed to be call from the interface. These
	  commands should short, so that the core is not blocked more than necessary. *)
 allowed_commands = [
  (df, df);
  (ls, "ls incoming");]

	(* Allow you to use any command with ! in the interface instead of only the
	  ones in allowed_commands *)
 allow_any_command = false

	(* Allow others to browse our share list (0: none, 1: friends only, 2: everyone *)
 allow_browse_share = 1

	(* Regexp of messages to filter out, example: string1|string2|string3 *)
 messages_filter = "DI-Emule|ZamBoR|Ketamine|eMule FX|AUTOMATED MESSAGE|Hi Honey!|Do you live in my area|download HyperMule"

	(* Regexp of comments to filter out, example: string1|string2|string3 *)
 comments_filter = "http://|https://|www\\."


    (************************************)
    (* SECTION : Other *)
    (* Other options *)
    (************************************)



	(* (experimental) *)
 save_results = 0

	(* Buffer writes and flush after buffer_writes_delay seconds (experimental) *)
 buffer_writes = false

	(* build statistics about eMule mods *)
 emule_mods_count = false

	(* show all eMule mods in statistics *)
 emule_mods_showall = false

	(* How often (in hours) should a backup of the ini files be written into old_config.
	  A value of zero means that a backup is written only when the core shuts down. *)
 backup_options_delay = 0

	(* Define the total number of options archives in old_config. *)
 backup_options_generations = 10

	(* Define the format of the archive, zip or tar.gz are valid. *)
 backup_options_format = "tar.gz"

	(* The maximum time in seconds to wait for networks to cleanly shutdown. *)
 shutdown_timeout = 3

	(* The IP address used to bind the p2p clients *)
	(* changing this option requires restart of MLDonkey core *)
 client_bind_addr = "0.0.0.0"



(*****************************************************************)
(*                                                               *)
(*                       ADVANCED OPTIONS                        *)
(*                                                               *)
(*        All the options after this line are for the expert     *)
(*        user. Do not modify them if you are not   sure.        *)
(*                                                               *)
(*****************************************************************)





    (************************************)
    (* SECTION : Interfaces FOR EXPERTS *)
    (* Options to control ports used by mldonkey interfaces *)
    (************************************)



	(* The IP address used to bind the http server *)
	(* changing this option requires restart of MLDonkey core *)
 http_bind_addr = "0.0.0.0"

	(* The IP address used to bind the gui server *)
	(* changing this option requires restart of MLDonkey core *)
 gui_bind_addr = "0.0.0.0"

	(* The IP address used to bind the telnet server *)
	(* changing this option requires restart of MLDonkey core *)
 telnet_bind_addr = "0.0.0.0"

	(* Should *all* sources for a file be shown on HTML/telnet vd <num> *)
 print_all_sources = true

	(* Improved telnet interface *)
 improved_telnet = true

	(* A space-separated list of keywords. Each keyword triggers
	  printing information on the corresponding messages:
	  verb : verbose mode (interesting not only for coders)
	  mc : debug client messages
	  mr|raw : debug raw messages
	  mct : debug emule clients tags
	  ms : debug server messages
	  sm : debug source management
	  net : debug net
	  gui : debug gui
	  no-login : disable login messages
	  file : debug file handling
	  do : some download warnings
	  up : some upload warnings
	  unk : unknown messages
	  ov : overnet
	  loc : debug source research/master servers
	  share: debug sharing
	  md4 : md4 computation
	  connect : debug connections
	  udp : udp messages
	  ultra|super : debug supernode
	  swarming : debug swarming
	  hc : http_client messages
	  hs : http_server messages
	  com : commands by non-admin users
	  act : debug activity
	  bw : debug bandwidth
	  geo : debug GeoIP
	  unexp : debug unexpected messages
	  dht : debug DHT *)
 verbosity = ""


    (************************************)
    (* SECTION : Bandwidth FOR EXPERTS *)
    (* Bandwidth options *)
    (************************************)



	(* The delay in milliseconds to wait in the event loop. Can be decreased to
	  increase the bandwidth usage, or increased to lower the CPU usage. *)
 loop_delay = 5


    (************************************)
    (* SECTION : Networks FOR EXPERTS *)
    (* Networks options *)
    (************************************)



	(* Set to true if you also want mldonkey to run as a OpenFT sub node (experimental) *)
 enable_openft = false


    (************************************)
    (* SECTION : Network Config FOR EXPERTS *)
    (* Network config options *)
    (************************************)



	(* URLs of RSS feeds *)
 rss_feeds = []

	(* If MLDonkey can not read broken RSS feeds, use this program to preprocess them *)
 rss_preprocessor = xmllint

	(* Keep IP blocking ranges descriptions in memory *)
 ip_blocking_descriptions = false

	(* IP blocking list filename (peerguardian format), can also be in gz/bz2/zip format
	  Zip files must contain either a file named guarding.p2p or guarding_full.p2p. *)
 ip_blocking = ""

	(* List of countries to block connections from/to (requires Geoip).
	  Names are in ISO 3166 format, see http://www.maxmind.com/app/iso3166
	  You can also at your own risk use "Unknown" for IPs Geoip won't recognize. *)
 ip_blocking_countries = []

	(* false: use ip_blocking_countries as block list, all other countries are allowed
	  true: use ip_blocking_countries as allow list, all other countries are blocked *)
 ip_blocking_countries_block = false

	(* Location of GeoIP.dat (Get one from http://www.maxmind.com/download/geoip/database/) *)
 geoip_dat = ""

	(* The size of the header of a TCP/IP packet on your connection (ppp adds
	  14 bytes sometimes, so modify to take that into account) *)
 tcpip_packet_size = 40

	(* The size of the MTU of a TCP/IP packet on your connection *)
 mtu_packet_size = 1500

	(* The size of the minimal packet you want mldonkey to send when data is
	  available on the connection *)
 minimal_packet_size = 600

	(* Should a connection check if the peer we are connected to is still alive?
	  This implies some bandwidth-cost (with 200 connections ~10-20%) *)
 socket_keepalive = false


    (************************************)
    (* SECTION : HTML mods FOR EXPERTS *)
    (* Options to configure HTML mode *)
    (************************************)



	(* Whether to use the modified WEB interface *)
 html_mods = true

	(* Which html_mods style to use (set with html_mods_style command) *)
 html_mods_style = 0

	(* Whether to use human readable GMk number format *)
 html_mods_human_readable = true

	(* Whether to use relative availability in the WEB interface *)
 html_mods_use_relative_availability = true

	(* Whether to display the Net column in vd output *)
 html_mods_vd_network = true

	(* Whether to display the Comments column in vd output *)
 html_mods_vd_comments = true

	(* Whether to display the User column in vd output *)
 html_mods_vd_user = false

	(* Whether to display the Group column in vd output *)
 html_mods_vd_group = false

	(* Whether to display the Active Sources column in vd output *)
 html_mods_vd_active_sources = true

	(* Whether to display the Age column in vd output *)
 html_mods_vd_age = true

	(* Whether to display flags instead of country codes *)
 html_flags = true

	(* Show graph in vd output *)
 html_mods_vd_gfx = true

	(* Remove graph files on core shutdown *)
 html_mods_vd_gfx_remove = false

	(* Fill graph in vd output *)
 html_mods_vd_gfx_fill = true

	(* Split download and upload graph in vd output *)
 html_mods_vd_gfx_split = false

	(* Stacked download and upload graph *)
 html_mods_vd_gfx_stack = true

	(* Flip up/side graph position in vd output *)
 html_mods_vd_gfx_flip = true

	(* Show mean line on graph in vd output *)
 html_mods_vd_gfx_mean = true

	(* Show transparent graph in vd output (only for png) *)
 html_mods_vd_gfx_transparent = true

	(* Draw graph as png if true, else draw as jpg in vd output *)
 html_mods_vd_gfx_png = true

	(* Show hourly graph in vd output *)
 html_mods_vd_gfx_h = true

	(* Graph x size in vd output ( 365 < x < 3665 ) *)
 html_mods_vd_gfx_x_size = 795

	(* Graph y size in vd output ( 200 < y < 1200 ) *)
 html_mods_vd_gfx_y_size = 200

	(* compute values for hourly graph every 1,2,3,4,5,10,15,20,30,60 min
		Changes to this option require a core restart. *)
	(* changing this option requires restart of MLDonkey core *)
 html_mods_vd_gfx_h_intervall = 60

	(* Dynamic grid width, start with 1 h/grid, maximum html_mods_vd_gfx_h_grid_time h/grid *)
 html_mods_vd_gfx_h_dymamic = true

	(* Max hours on time scale per grid (0 = no limit) *)
 html_mods_vd_gfx_h_grid_time = 0

	(* Number of shown subgrids on graph (0 = no subgrids) *)
 html_mods_vd_gfx_subgrid = 0

	(* Draw tag graph *)
 html_mods_vd_gfx_tag = false

	(* Use tag source image  *)
 html_mods_vd_gfx_tag_use_source = false

	(* Tag source image name *)
 html_mods_vd_gfx_tag_source = image

	(* Draw tag as png if true, else draw as jpg in vd output *)
 html_mods_vd_gfx_tag_png = true

	(* Enable tag graph title *)
 html_mods_vd_gfx_tag_enable_title = true

	(* Tag graph title *)
 html_mods_vd_gfx_tag_title = "MLNet traffic"

	(* Tag graph title x pos in vd output *)
 html_mods_vd_gfx_tag_title_x_pos = 4

	(* Tag graph title y pos in vd output *)
 html_mods_vd_gfx_tag_title_y_pos = 1

	(* Tag graph download x pos in vd output *)
 html_mods_vd_gfx_tag_dl_x_pos = 4

	(* Tag graph download y pos in vd output *)
 html_mods_vd_gfx_tag_dl_y_pos = 17

	(* Tag graph upload x pos in vd output *)
 html_mods_vd_gfx_tag_ul_x_pos = 4

	(* Tag graph upload y pos in vd output *)
 html_mods_vd_gfx_tag_ul_y_pos = 33

	(* Tag graph x size in vd output ( 130 < x < 3600 ) *)
 html_mods_vd_gfx_tag_x_size = 80

	(* Tag graph y size in vd output ( 50 < x < 1200 ) *)
 html_mods_vd_gfx_tag_y_size = 50

	(* Whether to display the Last column in vd output *)
 html_mods_vd_last = true

	(* Whether to display the Priority column in vd output *)
 html_mods_vd_prio = true

	(* Change height of download indicator bar in vd output *)
 html_vd_barheight = 2

	(* Whether to display chunks list as graph or text in vd output *)
 html_vd_chunk_graph = true

	(* Change style of chunk graph *)
 html_vd_chunk_graph_style = 0

	(* Change max width of chunk graph *)
 html_vd_chunk_graph_max_width = 200

	(* Whether to display the pending slots in uploaders command *)
 html_mods_show_pending = true

	(* Whether to load the mldonkey_messages.ini file (false=use internal settings) *)
 html_mods_load_message_file = false

	(* Maximum chat messages to log in memory *)
 html_mods_max_messages = 50

	(* Whether to use checkboxes in the WEB interface for download list *)
 html_checkbox_vd_file_list = true

	(* Whether to use checkboxes in the WEB interface for search result list *)
 html_checkbox_search_file_list = false

	(* Use gzip compression on web pages *)
 html_use_gzip = false

	(* Whether to use the fancy javascript tooltips or plain html-title *)
 html_mods_use_js_tooltips = true

	(* How long to wait before displaying the tooltips *)
 html_mods_js_tooltips_wait = 0

	(* How long to display the tooltips *)
 html_mods_js_tooltips_timeout = 100000

	(* Use javascript to display option help text as js popup (true=use js, false=use html tables) *)
 html_mods_use_js_helptext = true


    (************************************)
    (* SECTION : Debug FOR EXPERTS *)
    (* Debug options *)
    (************************************)



	(* If this option is set, IP addresses on the local network are allowed *)
 allow_local_network = false

	(* size of log in number of records *)
 log_size = 300

	(* Maximum size of log_file in MB, this value is only checked on startup,
	   log_file will be deleted if its bigger than log_file_size. *)
 log_file_size = 2

	(* The file in which you want mldonkey to log its debug messages. If you
	  set this option, mldonkey will log this info in the file until you use the
	  'close_log' command. The log file may become very large. You can
	  also enable logging in a file after startup using the 'log_file' command. *)
 log_file = "mlnet.log"

	(* Post log messages to syslog. This setting is independent of log_file
	  and its associated commands, therefore close_log does not stop log to syslog.
	  Its therefore possible to log to syslog and log_file at the same time. *)
 log_to_syslog = false

	(* number of lines for GUI console messages *)
 gui_log_size = 30


    (************************************)
    (* SECTION : Download FOR EXPERTS *)
    (* Download options *)
    (************************************)



	(* How many sources to use to download each chunk *)
 sources_per_chunk = 3


    (************************************)
    (* SECTION : Startup FOR EXPERTS *)
    (* Startup options *)
    (************************************)



	(* How many megabytes should MLdonkey keep for saving configuration files. *)
	(* changing this option requires restart of MLDonkey core *)
 config_files_security_space = 10


    (************************************)
    (* SECTION : Paths FOR EXPERTS *)
    (* Paths options *)
    (************************************)



	(* Name of program used for preview (first arg is local filename, second arg
	  is name of file as searched on eDonkey *)
 previewer = mldonkey_previewer

	(* Directory where mldonkey binaries are installed *)
 mldonkey_bin = "."

	(* Name of GUI to start *)
 mldonkey_gui = ".\\mlgui"


    (************************************)
    (* SECTION : Other FOR EXPERTS *)
    (* Other options *)
    (************************************)



	(* Buffer writes and flush after buffer_writes_delay seconds (experimental) *)
	(* changing this option requires restart of MLDonkey core *)
 buffer_writes_delay = 30.

	(* Flush buffers if buffers exceed buffer_writes_threshold kB (experimental) *)
 buffer_writes_threshold = 1024

	(* The conversions to apply on Unicode characters *)
 utf8_filename_conversions = []

	(* The size of the buffer between the client and its GUI. Can be useful
	  to increase when the connection between them has a small bandwith *)
 interface_buffer = 1000000

	(* The size long names will be shortened to in the interface *)
 max_name_len = 50

	(* The size filenames will be shortened to in search results *)
 max_result_name_len = 50

	(* The maximum number of different filenames used by MLDonkey *)
 max_filenames = 50

	(* The size long client names will be shortened to in the interface *)
 max_client_name_len = 25

	(* Is the default terminal an ANSI terminal (escape sequences can be used) *)
 term_ansi = true

	(* Delay between updates to the GUI *)
 update_gui_delay = 1.

	(* The realm shown when connecting with a WEB browser *)
 http_realm = MLdonkey

	(* This option controls whether the WEB interface should show frame borders or not *)
 html_frame_border = true

	(* The height of the command frame in pixel (depends on your screen and browser sizes) *)
 commands_frame_height = 46

	(* Message printed at startup additional to welcome text *)
 motd_html = ""

	(* Force compaction every <n> hours (in [1..24]) *)
 compaction_delay = 2

	(* The delay between reloads of the vd output in the WEB interface *)
 vd_reload_delay = 120

	(* Should the MLSUBMIT.REG file be created *)
 create_mlsubmit = true

	(* Size of the minor heap in kB *)
 minor_heap_size = 32

	(* The source queues to display in source lists (see 'sources' command) *)
 relevant_queues = [
  0;
  1;
  2;
  3;
  4;
  5;
  6;
  8;
  9;
  10;]

	(* The minimal delay between two connections to the same client (in seconds) *)
 min_reask_delay = 600

	(* Whether to display results already downloaded *)
 display_downloaded_results = true

	(* Minimal number of results for filter form to appear *)
 filter_table_threshold = 50

	(* Maximal size in byte of the buffers of a client, minimum 50.000 byte.
	For high-volume links raise this value to 1.000.000 or higher. *)
 client_buffer_size = 500000

	(* The delay between two saves of the 'downloads.ini' file (default is 15 minutes).
	  Changes to this option require a core restart. *)
	(* changing this option requires restart of MLDonkey core *)
 save_options_delay = 900.

	(* timeout when connecting to a server *)
 server_connection_timeout = 30.

	(* The delay between one glance at a file and another *)
	(* changing this option requires restart of MLDonkey core *)
 download_sample_rate = 1.

	(* How many samples go into an estimate of transfer rates *)
 download_sample_size = 100

	(* This option defines a set of date at which some commands have to be executed.
	  For each tuple, the first argument is a list of week days (from 0 to 6),
	  the second is a list of hours (from 0 to 23) and the last one a command to
	  execute. Can be used with 'pause all' and 'resume all' for example to
	  resume and pause downloads automatically for the night. *)
 calendar = []

	(* The percentage of free memory before a compaction is triggered *)
 compaction_overhead = 25

	(* The major GC speed is computed from this parameter. This is the memory
	  that will be "wasted" because the GC does not immediatly collect 
	  unreachable blocks. It is expressed as a percentage of the memory used
	  for live data. The GC will work more (use more CPU time and collect 
	  blocks more eagerly) if space_overhead is smaller. *)
 space_overhead = 80

	(* Maximal number of results displayed for a search *)
 max_displayed_results = 1000

	(* (internal option) *)
	(* Do not change this option, internal use only! *)
 options_version = 22

	(* Maximum number of comments per file *)
 max_comments_per_file = 100

	(* Maximum length of file comments *)
 max_comment_length = 256
