;***********************************************************************
;
; OEMSETUP.INF
;
;       Intel EtherExpress PRO/D100 network adapters and 
;       driver SETUP INF file.
;
;       This will work with:
;           D100      PCI   10/D100  MB
;
;       PROSet Version 1.32
;
;***********************************************************************

[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    ISA
    EISA
    PCI
    "Jazz-Internal Bus"

[LanguagesSupported]
    ENG

[Options]
    E100BPCI

[OptionsTextENG]
    E100BPCI  = "Intel EtherExpress PRO/100B Adapter"


[Files-Inf]
1, oemsetup.inf, SIZE=50000, RENAME=$(!UG_Filename)


[Files-E100BPCI]
1, NT\E100B.SY_, SIZE=50000, RENAME=E100B.SYS

[Files-PROSet]
1, NT\PROSET.EX_, SIZE=50000, RENAME=PROSET.EXE
1, NT\EP100DG.DL_, SIZE=50000, RENAME=EP100DG.DLL
1, NT\PROKDD.DL_, SIZE=50000, RENAME=PROKDD.DLL
1, NT\MFC30.DL_, SIZE=50000, RENAME=MFC30.DLL
1, NT\MSVCRT20.DL_, SIZE=50000, RENAME=MSVCRT20.DLL
1, NT\E100SET.HL_, SIZE=50000, RENAME=E100SET.HLP
1, NT\CTL3D32.DL_, SIZE=50000, RENAME=CTL3D32.DLL
1, NT\PROPCI.DL_, SIZE=50000, RENAME=PROPCI.DLL
1, NT\EPRO100.DL_, SIZE=50000, RENAME=EPRO100.DLL

[Files-PROSet-Drivers]
1, NT\SPDO3DG.SY_, SIZE=50000, RENAME=SPDO3DG.SYS
1, NT\EP100DG.SY_, SIZE=50000, RENAME=EP100DG.SYS
1, NT\PROKDD.SY_, SIZE=50000, RENAME=PROKDD.SYS

[FileConstants]
UtilityInf      = "UTILITY.INF"
ParamInf        = "NCPARAM.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0

NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"

Manufacturer    =  "Intel"
ProductMajorVersion     = "1"
ProductMinorVersion     = "0"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

ProductSoftwareName     = "E100B"
ProductSoftwareTitle    = "Intel PRO/100B Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\e100b.sys"
NetRuleSoftwareType     = "E100BSys ndisDriver E100BDriver"
NetRuleSoftwareUse      = $(SoftwareType)
NetRuleSoftwareBindForm = """E100BSys"" yes no container"
NetRuleSoftwareClass    = {"E100BDriver basic"}
NetRuleSoftwareBindable = {"E100BDriver E100BAdapter non exclusive 100"}

Configure = "EPRO100_Configure"
Detect = "EPRO100_Detect"
Diagnose = "EPRO100_Diagnose"
DLL = "EPRO100.DLL"
RegistryKey = "EPRO100_GetRegistryKey"
Summary = "EPRO100_Resource_Summary"
AdapterDescription = "EPRO100_GetAdapterDescription"
InstallAnyway = "EPRO100_InstallAnyway"
DeviceExist = "EPRO100_DeviceExist"
Adapter = "Intel EtherExpress PRO/100B Adapter"
Help = "E100SET.HLP"

BusNumber = "0,7,BusNumber,0,2,0,0,16,1"
BusType = "0,7,BusType,0,2,5,2,5,1"
BusTypeLocal = "0,7,BusTypeLocal,0,2,5,2,5,1"
Eid = "0,7,Eid,0,2,0,0,4294967295,1"
Fifo = "0,3,Fifo Depth,0,2,12,0,15,1"
ForceDpx = "1,4,Duplex Mode,0,1,Auto,Auto,Half,Full"
MediaType = "0,7,MediaType,0,2,1,1,1,1"
NumCoalesce = "1,7,Coalesce Buffers,0,2,8,1,32,1"
NumRfd = "1,7,Receive Buffers,0,2,16,1,128,1"
NumTbd = "0,3,Transmit Buffer Descriptors,0,2,64,1,65535,1"
NumTbdPerTcb = "0,4,Transmit Buffers per Frame,0,2,8,1,16,1"
NumTcb = "1,7,Transmit Control Blocks,0,2,16,1,80,1"
Off = "1,3,Off Timer,0,2,2,1,65535,1"
On = "1,3,On Timer,0,2,32768,1,65535,1"
RxDmaCount = "0,4,RxDmaCount,0,2,0,0,63,1"
RxFifo = "0,4,Receive Fifo Depth,0,2,8,0,15,1"
Slot = "0,3,Slot,0,2,0,0,64,1"
Speed = "1,7,Network Speed,0,4,Auto,Auto,0,10Mbps,10,100Mbps,100"
Threshold = "0,7,Transmit Threshold,0,2,16,0,200,1"
TxDmaCount = "0,4,TxDmaCount,0,2,0,0,63,1"
TxFifo = "0,4,Transmit Fifo Depth,0,2,8,0,15,1"

Ucode = "0,4,Ucode,0,2,0,0,1,1"
UnderrunRetry = "0,4,UnderrunRetry,0,2,1,0,3,1"
PerfOptims = "0,4,PerfOptims,0,2,0,0,65535,1"

PROSetKeyName = $(!NTN_ServiceBase)"\PROSet"
PROSetAdapterName = "EPRO100"
PROSetParameters = "Parameters"

ProductHardwareName     = "E100B"
ProductHardwareTitle    = "Intel PRO/100B Adapter"
NetRuleHardwareType     = "E100B E100BAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass    = {"E100BAdapter basic"}

EE16_1BYTE      = 139
EE16_2BYTE      = 98
NETCARD_ID      = 25227

ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"


[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[GeneralConstants]
from      = ""
to        = ""

ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2

KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""

TRUE            = 1
FALSE           = 0
NoTitle         = 0

ExitState   = "Active"
OldVersionExisted = $(FALSE)

DriverPath      = $(!STF_NTPATH)\drivers

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
	       "Are you sure you want to cancel copying files?"

ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"


FunctionTitle = "Intel EtherExpress PRO/100B Adapter Setup"
ProductSoftwareDescription = "Intel EtherExpress PRO/100B Driver"
ProductHardwareDescription = "Intel EtherExpress PRO/100B Adapter"


[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate

[Source Media Descriptions]
    1  = "Intel EtherExpress PRO/100B Driver Disk"  , TAGFILE = D100DISK

[Identify]
    read-syms Identification

    set !G:DebugOutputControl = 1
 
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)

    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}

    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	    goto returnoptions
	endif

	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	    goto returnoptions
	else
	    set Status = STATUS_NOTSUPPORTED
	    goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif

returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL

finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)

[InstallOption]
    set !G:DebugOutputControl = 1
    set Status   = STATUS_FAILED
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)

    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif

    set-subst LF = "\n"

    read-syms GeneralConstants
    read-syms FileConstants

    ;read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)

    detect date

    set-title  $(FunctionTitle)

    set to   = Begin
    set from = Begin

    Shell $(UtilityInf), GetBusTypeNum
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    Set PlatformList = ^(PlatformsSupported, 1)
    Set MachineType = *($(PlatformList), $($R1))

    set CommonStatus = STATUS_SUCCESSFUL

    EndWait


Begin = +
    Set ActivateDetection = FALSE

    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	set ActivateDetection = TRUE
	set StartLabel = configureadapter

	ifstr(i) $(MachineType) == "MCA"
	    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
		Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	    else
		Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_HARDWARE
	    endif
	    set Error = $($R0)
	    set from = end
	    set to = end
	    goto nonfatalinfo
	endif

	Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	    Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set Error = $($R0)
	    set from = end
	    set to = end
	    goto nonfatalinfo
	endif
    else
	set ActivateDetection = TRUE
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif

    Set DetectedCard = FALSE

    Ifstr(i) $(ActivateDetection) != TRUE
	Goto $(StartLabel)
    Endif

    ifstr(i) $(MachineType) == "MCA"
	goto CheckForMCA
    endif

    set IRQValue = *($(IRQList), 2)
    set IOAddrValue = *($(IOAddrList), 1)
    set IOReadyValue = *($(IOReadyList), 2)
    set TransceiverValue = *($(TransceiverList), 4)

    Ifstr(i) $(!STF_NCDETECT) == YES
	Ifstr(i) $(!STF_NCOPTION) == $(Option)
	   Set DetectedCard = TRUE
	Endif
    Endif

    Shell "" DebugConfiguration "After parameter querying"

    Set from = $(fatal)
    Set to = $(fatal)
    Goto $(StartLabel)

installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)

	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	   Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
	       $(ProductVersion)
	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif

	   goto end
	else
	   Shell $(UtilityInf), CardExistedDlg

	   ifint $($ShellCode) != $(!SHELL_CODE_OK)
	       goto ShellCodeError
	   endif

	   ifstr(i) $($R1) != "OK"
	       goto end
	   endif
	   set OldVersionExisted = $(TRUE)
	endif
    endif

    Ifstr(i) $(DetectedCard) != TRUE
	Goto adaptersetup
    Endif

CheckForMCA = +    
    StartWait
    Shell $(UtilityInf), MCAFindBus, $(EE16_1BYTE), $(EE16_2BYTE)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto CheckForISA
    endif
    ifstr $($R0) != "NO_ERROR"
	goto CheckForISA
    endif
    ifstr(i) $($R1) == {}
	set Error = $(CANNOT_FIND_ANY_CARD)
	set CommonStatus = USER_CANCEL
	set from = "end"
	goto nonfatal
    endif
    set AdapterList = $($R1)
    goto skipoptions

CheckForISA = +

    Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD)
    EndWait
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
	Goto adaptersetup
    Endif
    Set DetectedParams = $($R1)
    Shell $(ParamInf) Param_SetDefaults $(DetectedParams)

    goto adaptersetup

configureadapter = +
    Ifstr $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	    goto fatalregistry
	Endif
    Endif
   GetRegValue $(KeyProduct),"ServiceName", AdapterServiceKey
   set AdapterServiceKey = *($(AdapterServiceKey),4)

    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Goto fatalregistry
    endif

    Set KeyParameters = $($R2)

    CloseRegKey $($R1)

    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	goto fatalregistry
    endif

    set OldVersionExisted = $(TRUE)

    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}

adaptersetup = +

    Shell "" DebugConfiguration "before displaying dialog"

    
    Shell "" DebugConfiguration "After List Translation"
    
    Shell $(ParamInf) Param_ParameterConfidence
    Ifstr(i) $($R0) != STATUS_SUCCESSFUL
	Goto adapteroptions
    Endif

    Ifstr(i) $(DetectedCard) == TRUE
	Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM
	    Goto adapterverify
	Endif
    Endif

adapteroptions = +
    Set from = adapteroptions
    ;read-syms FileDependentDlg$(!STF_LANGUAGE)

adapterverify = +

    Shell "" DebugConfiguration "after running dialog"

    Ifstr(i) $(DetectedCard) != TRUE
	Goto skipoptions
    Endif

    Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD)
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
	Goto skipoptions
    Endif

    Set from = adapteroptions
    Set to = skipoptions
    Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto Warning
skipoptions =+

    ifint $(OldVersionExisted) == $(TRUE)
	ifstr(i) $(!NTN_InstallMode) == configure
	    goto writeparameters
	endif
    endif
    StartWait
    ifint $(OldVersionExisted) == $(FALSE)
	ifstr(i) $(!NTN_InstallMode) == "install"
	   Ifstr(i) $(DoCopy) == "YES"

	      Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES

	      Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  Goto ShellCodeError
	      Else-Ifstr(i) $($R0) == STATUS_FAILED
		  Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
		  ifint $($ShellCode) != $(!SHELL_CODE_OK)
		      goto ShellCodeError
		  endif
		  set Error = $($R0)
		  Goto fatal
	      Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
		  Goto successful
	      Endif

	      Set SrcDir = $($R1)

	   Endif

	   install "Install-Option"
	   ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	      Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	      ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  goto ShellCodeError
	      endif
	      set Error = $($R0)
	      goto fatal
	   endif
	endif

	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)

	Set OEM_ABANDON_SOFTWARE = TRUE

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)
	set KeyProduct      = $($R1)
	Set SoftNetRulesKey = $($R2)
	CloseRegKey $($R3)
	CloseRegKey $($R4)
	CloseRegKey $($R5)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    goto fatalregistry
	endif

	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

	Shell  $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    CloseRegKey $(KeyProduct)
	    CloseRegKey $(SoftNetRulesKey)
	    goto fatalregistry
	endif

	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

	Shell  $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	CloseRegKey $(KeyProduct)
	CloseRegKey $(SoftNetRulesKey)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    EndWait
	    goto fatalregistry
	endif
    endif
    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)

    ifint $($R4) != -1
	Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
    endif

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	CloseRegKey $($R1)
	CloseRegKey $($R2)
	CloseRegKey $($R3)
	goto fatalregistry
    endif

    set KeyParameters = $($R3)
    set KeyAdapterRules = $($R2)
    set AdapterNumber = $($R4)

    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
		       {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
		       {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
		       {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
		       {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
		       {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}

   set AdapterServiceKey = $($R5)

    Shell  $(UtilityInf), AddValueList, $($R1), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif

    CloseRegKey $($R1)

    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)

    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
			{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
			{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
			{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}

    Shell  $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	EndWait
	CloseRegKey $(KeyParameters)
	CloseRegKey $(KeyAdapterRules)
	goto fatalregistry
    endif

    CloseRegKey $(KeyAdapterRules)

    goto writeparameters
writeparameters = +
    Shell $(UtilityInf), GetBusTypeNum
    set BusTypeNum = $($R1)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
       Set IOAddrValue = *($(IOAddrValues), ~($(IOAddrList),$(IOAddrValue)))
       Shell "" DebugConfiguration "Before Writing Parameters"
       set NewValueList = {{Eid,$(NoTitle),$(!REG_VT_DWORD),0)}}
    
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)

    CloseRegKey $(KeyParameters)

   OpenRegKey $(!REG_H_LOCAL) "" $(PROSetKeyName)"\"Adapters $(MAXIMUM_ALLOWED) PROSetAdapterKey
   ifstr $(PROSetAdapterKey) == $(KeyNull)
      CreateRegKey $(!REG_H_LOCAL) {$(PROSetKeyName)"\"Adapters,0,GenericClass} "" +
		   $(MAXIMUM_ALLOWED) "" PROSetAdapterKey
      ifstr $(PROSetAdapterKey) == $(KeyNull)
	 Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegAdapterFailed
	 goto fatalregistry
      endif      
   endif

   set NewValueList = {{$(PROSetAdapterName),$(NoTitle), $(!REG_VT_SZ), $(Adapter)}}
	Shell  $(UtilityInf), AddValueList, $(PROSetAdapterKey), $(NewValueList)
	CloseRegKey $(PROSetAdapterKey)
    
   OpenRegKey $(!REG_H_LOCAL) "" $(PROSetKeyName)"\"$(PROSetAdapterName) $(MAXIMUM_ALLOWED) PROSetAdapterKey
   ifstr $(PROSetAdapterKey) == $(KeyNull)
      CreateRegKey $(!REG_H_LOCAL) {$(PROSetKeyName)"\"$(PROSetAdapterName),0,GenericClass} "" +
		   $(MAXIMUM_ALLOWED) "" PROSetAdapterKey
      ifstr $(PROSetAdapterKey) == $(KeyNull)
	 Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegEPRO10Failed
	 goto fatalregistry
      endif
   endif
    set NewValueList = {{Configure,$(NoTitle),$(!REG_VT_SZ),$(Configure)},+
			{Detect,$(NoTitle),$(!REG_VT_SZ),$(Detect)},+
			{Diagnose,$(NoTitle),$(!REG_VT_SZ),$(Diagnose)},+
			{DLL,$(NoTitle),$(!REG_VT_SZ),$(DLL)},+
			{Help,$(NoTitle),$(!REG_VT_SZ),$(Help)},+
			{RegistryKey,$(NoTitle),$(!REG_VT_SZ),$(RegistryKey)},+
			{AdapterDescription,$(NoTitle),$(!REG_VT_SZ),$(AdapterDescription)},+
			{InstallAnyway,$(NoTitle),$(!REG_VT_SZ),$(InstallAnyway)},+
			{DeviceExist,$(NoTitle),$(!REG_VT_SZ),$(DeviceExist)},+
			{Summary,$(NoTitle),$(!REG_VT_SZ),$(Summary)}}
	Shell  $(UtilityInf), AddValueList, $(PROSetAdapterKey), $(NewValueList)
	CloseRegKey $(PROSetAdapterKey)

   OpenRegKey $(!REG_H_LOCAL) "" $(PROSetKeyName)"\"$(PROSetAdapterName)"\"$(PROSetParameters) $(MAXIMUM_ALLOWED) PROSetAdapterKey
   ifstr $(PROSetAdapterKey) == $(KeyNull)
      CreateRegKey $(!REG_H_LOCAL) {$(PROSetKeyName)"\"$(PROSetAdapterName)"\"$(PROSetParameters),0,GenericClass} "" +
		   $(MAXIMUM_ALLOWED) "" PROSetAdapterKey
      ifstr $(PROSetAdapterKey) == $(KeyNull)
	 Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" CreateRegEPRO10Failed
	 goto fatalregistry
      endif
   endif
    set NewValueList = { +
			{BusNumber,$(NoTitle),$(!REG_VT_SZ),$(BusNumber)}, +
			{BusType,$(NoTitle),$(!REG_VT_SZ),$(BusType)}, +
			{BusTypeLocal,$(NoTitle),$(!REG_VT_SZ),$(BusTypeLocal)}, +
			{Eid,$(NoTitle),$(!REG_VT_SZ),$(Eid)}, +
			{Fifo,$(NoTitle),$(!REG_VT_SZ),$(Fifo)}, +
			{ForceDpx,$(NoTitle),$(!REG_VT_SZ),$(ForceDpx)}, +
			{MapRegisters,$(NoTitle),$(!REG_VT_SZ),$(MapRegisters)}, +
			{MediaType,$(NoTitle),$(!REG_VT_SZ),$(MediaType)}, +
			{NumCoalesce,$(NoTitle),$(!REG_VT_SZ),$(NumCoalesce)}, +
			{NumRfd,$(NoTitle),$(!REG_VT_SZ),$(NumRfd)}, +
			{NumTbd,$(NoTitle),$(!REG_VT_SZ),$(NumTbd)}, +
			{NumTbdPerTcb,$(NoTitle),$(!REG_VT_SZ),$(NumTbdPerTcb)}, +
			{NumTcb,$(NoTitle),$(!REG_VT_SZ),$(NumTcb)}, +
			{Off,$(NoTitle),$(!REG_VT_SZ),$(Off)}, +
			{On,$(NoTitle),$(!REG_VT_SZ),$(On)}, +
			{RxDmaCount,$(NoTitle),$(!REG_VT_SZ),$(RxDmaCount)}, +
			{RxFifo,$(NoTitle),$(!REG_VT_SZ),$(RxFifo)}, +
			{Slot,$(NoTitle),$(!REG_VT_SZ),$(Slot)}, +
			{Speed,$(NoTitle),$(!REG_VT_SZ),$(Speed)}, +
			{Threshold,$(NoTitle),$(!REG_VT_SZ),$(Threshold)}, +
			{TxDmaCount,$(NoTitle),$(!REG_VT_SZ),$(TxDmaCount)}, +
			{TxFifo,$(NoTitle),$(!REG_VT_SZ),$(TxFifo)}, +
			{Ucode,$(NoTitle),$(!REG_VT_SZ),$(Ucode)}, +
			{UnderrunRetry,$(NoTitle),$(!REG_VT_SZ),$(UnderrunRetry)}, +
			{PerfOptims,$(NoTitle),$(!REG_VT_SZ),$(PerfOptims)}, +
		       }
 
	Shell  $(UtilityInf), AddValueList, $(PROSetAdapterKey), $(NewValueList)
	CloseRegKey $(PROSetAdapterKey)

    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif

    set RegistryErrorIndex = $($R0)

    Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	goto fatalregistry
    endif

    EndWait

    RunProgram ExitCode "" "" $(!STF_WINDOWSSYSPATH)\PROSET.EXE $(AdapterServiceKey) 
    Ifstr(i) $(!NTN_InstallMode) != configure
      ifint $(ExitCode) >= 2 
	      set CommonStatus = STATUS_USERCANCEL
	 goto abandon
      endif
    else
      ifint $(ExitCode) == 0
	      set CommonStatus = STATUS_NO_EFFECT
      endif
      ifint $(ExitCode) == 2
         set CommonStatus = STATUS_NO_EFFECT
      endif
    endif
    goto successful

bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal

removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    else
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(!NTN_RegBase)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif

    goto end

UpgradeSoftware = +
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct

	Ifstr $(KeyProduct) != $(KeyNull)
	    GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
	    set Version = *($(VersionInfo), 4)

	    Split-String $(!NTN_Infname), "\", FilenameList
	    QueryListSize ListSize $(FilenameList)
	    set !UG_Filename = *($(FilenameList), $(ListSize))

	    install "Install-Update"
	    ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		goto fatal
	    endif

	    SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	    SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}

	    ifint $(Version) != $(ProductVersion)
	    endif
	    CloseRegKey $(KeyProduct)
	else
	    goto fatalregistry
	endif
    else
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
	      $(MAXIMUM_ALLOWED) NetworkCardKey
	Ifstr(i) $(NetworkCardKey) != $(KeyNull)
	    GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
	    set ServiceName = *($(ServiceNameInfo), 4)

	    OpenRegKey $(NetworkCardKey) "" "NetRules" +
		$(MAXIMUM_ALLOWED) NetRuleKey
	    Ifstr(i) $(NetRuleKey) != $(KeyNull)
	    else
		goto fatalregistry
	    endif

	    CloseRegKey $(NetRules)
	    CloseRegKey $(NetworkCardKey)
	else
	    goto fatalregistry
	endif
	OpenRegKey $(!REG_H_LOCAL) "" +
	      $(!NTN_ServiceBase)"\"$(ServiceName) +
	      $(MAXIMUM_ALLOWED) ServiceKey

	Ifstr(i) $(ServiceKey) != $(KeyNull)
	    CloseRegKey $(ServiceKey)
	else
	    goto fatalregistry
	endif
    endif

    goto end

successful = +
    goto end

abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo

    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	; Remove Software Component
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)

	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif

    goto end

warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set Severity = STATUS
    Set CommonStatus = STATUS_USERCANCEL
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif

fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fataldetect = +
    Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    Goto fatal
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif

    goto setfailed

ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = "Error: "$(FunctionTitle)
    set STF_MB_TEXT  = "Shell Code Error"
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed

setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end

end = +
    goto term

term = +
    Return $(CommonStatus)


[DebugConfiguration]

    Set InfName = "OEMNADIN.INF"

    return


[Install-Option]
    set STF_VITAL = ""

    ifstr(i) $(AddCopy) == "YES"

	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-PROSet $(SrcDir)  $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-PROSet-Drivers $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers

    endif

    ifstr(i) $(DoCopy) == "YES"

       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList

    endif

    Exit

[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"

   AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-PROSet $(SrcDir)  $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-PROSet-Drivers $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers

   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList

   exit

