;   Door Control file
;--------------------------------
; The semi-colons are comment markers.  Remove them to activate option.
;
;Sysopfirst  Specifies the first name of the sysop as it will be shown to
;            the users.
;
;SysopLast   Specifies the last name of the sysop as it will be shown to
;            the users.
;
;BBSName     Specifies the name of the bbs as it will be shown to users.
;
;Pausecode   Specifies the Rip pause code that your bbs uses.  This will
;            be added to muliple page Rip news file so you can use them
;            as a bulletin.
;
;Mono        Will disable color on the local side. (Necessary if you are
;            running a monochrome system)
;
;BBSType     Specifies the type of bbs software under which this door program
;            will be run. Valid bbs types include:
;
;                  DOORSYS - The DOOR.SYS format (Wildcat!,GAP,TAG, etc)
;                     RBBS - Rbbs version 16.1+  (uses DORINFOx.DEF*)
;                    QUICK - Quickbbs,Force,R.A. (uses DORINFOx.DEF**)
;                    PCB12 - Pcboard version 12 (note: see COMPORT note below)
;                    PCB14 - Pcboard version 14
;                    PCB15 - Pcboard version 15
;                  PHOENIX - Phoenix bbs (uses INFO.BBS)
;                 SPITFIRE - Spitfires bbs (uses SFDOORS.DAT)
;                     WWIV - WWIV bbs (uses CHAIN.TXT)
;                      2AM - 2 A.M. software (uses JUMPER.DAT)
;                   TRIBBS - TriBBS software (uses TRIBBS.SYS)
;                 CALLINFO - Old Wildcat 2.xx(obsolete dropfile CALLINFO.BBS)
;
;  Notes: There are at least two different types of DORINFOx.DEF
;           *  ANSI graphics is selected when a "2" is passed in the graphics
;              parameter of the DORINFOx.DEF.   RBBS standard.
;          **  ANSI graphics is selected when a "1" is passed in the graphics
;              parameter of the DORINFOx.DEF.   QuickBBS,Remote Access,FORCE,
;              UltraBBS and many shareware BBSes require this type.
;
;ComPort     For bbs types that do not have the com-port contained in their
;            door information files (such as PCBOARD-12), you will have to
;            specify the com-port. Simply put the port number (i.e. 1,2,etc)
;            not the whole word COM1.  If you find that one node locks up
;            another node you may have to use this option.
;            [NOTE: You can also specify the comport using /Cx from the
;            command line]
;
;
;Fossil      Selecting this option will cause doordriver to use a fossil port
;            driver.  Otherwise doordriver will use its own internal comport
;            handlers.  Note - do not use both fossil and Xfossil at the same
;            time. Maximum standard bios speed of 38,400. This can be used
;            with the XOO fossil at ALL speeds.
;
;Xfossil     Selecting this option will cause DDPlus to use the extended fossil
;            driver speeds in other then X00 fossils.   This will support speeds of
;            57,800 or higher baud.  Otherwise DDPlus will use its own internal
;            comport handlers.  This option neither open or closes the fossil
;            but reads and writes to it in whatever state it is when the door
;            is run. This option is NOT required if you are using XOO.
;
;LockBaud    This will specify a locked baud rate. If you specify this
;            parameter, then no matter what the bbs software says, this
;            baud rate will be used. [NOTE: You can also specify the locked
;            baud rate using /Bxxxx from the command line]
;
;Port1       If you must use a non-standard interrupt, doordriver can be
;Port2       configured for IRQs 0-15. The port# indicates the chosen comport
;Port3       Follow this with the port address in hex.  Afterward put the IRQ
;Port4       in decimal.  For an example if comport 3 at irq 15 and address
;            $03E8 was needed use the following:
;            PORT3 03E8 15
;
;Maxtime     The maxtime parameter will allow you to specify a maximum time
;            per session that a user may be in the door. (i.e. if you
;            specified 30 minutes, then if the user had 60 mins left, he could
;            only play for 30 mins)
;
;Status      Specify "ON" if you wish the status line to appear at the bottom
;            of "OFF" if you wish it to be disabled.
;
;Statfore    Statfore foreground color of the status line and the major input
;            fields. (default 7  light-grey)
;
;Statback    The background color of the status line (default 1)
;
;Color1      Tells GAME to select ANSI graphics when a "1" is passed
;            in the graphics parameter of the DORINFOx.DEF. From what I
;            understand, FORCE and QUICKBBS require this option set although
;            RBBS should not.
;
;------------------------------ Sample Data ----------------------------------
;
SYSOPFIRST Mind
SYSOPLAST flux
BBSNAME Acid Phix
;
;       ::::------- Put your bbs type here! Select from those listed above
;       ::::
;       \/\/
BBSTYPE RBBS
;
;                   If you are using a bbs type that doesn't provide the com
;        ::-------- port num in it's door information file (such as pcb-12),
;        \/         then uncomment this line and put your com port here.
;COMPORT 1
;
; Uncomment the next line if you use a fossil device driver with speeds up to
; 38,400 baud. This will also work for the XOO fossil at ALL speeds.
FOSSIL
;
; Uncomment the next line if you use a fossil device driver using extended
; speeds of 57,600 or more baud and it is NOT the XOO fossil.
;XFOSSIL
;
;           ::------If you are locking ports uncomment this line and set this
;           ::      number to the port speed.
;           \/
LOCKBAUD 38400
;
;       ::------------ If you are going to use a non-standard IRQ place the
;       ::             port address in hex one space after the PORT# option.
;       ::
;       ::  ::-------- If you have a non-standard IRQ position the IRQ number
;       \/  \/         one space after the ports' hex address. (decimal)
;PORT1 03F8 4
;PORT2 02F8 3
;PORT3 03E8 4
;PORT4 02E8 3
;                   Uncomment this line if you want to make Rip bulletins
;  ::-------------- for your BBS.  Here a Wildcat pause is shown.
;  \/
;PAUSECODE @PAUSE@
MAXTIME 7
;------------------------------ End of File ----------------------------------

