ΥΝΝΝΝΝ» ΥΝΝΝΝΝ» ΥΝ» ΥΝ»        ΥΝΝΝΝΝ» ΥΝΝΝΝΝ» ΥΝΝΝΝΝ» (C)
³ ΙΝΝΝΌ ΤΝΝΈ  Ί ³ Ί ³ Ί        ³ ΙΝΈ Ί ³ ΙΝΈ Ί ³ ΙΝΝΝΌ
³ ΘΝ»    ΥΝΎ ΙΌ ³ ΘΝΎ Ί ΥΝΝΝΝ» ³ Ί ΤΝΌ ³ ΘΝΎ Ί ³ ΘΝΝΝ»
³ ΙΝΌ   ΥΎ ΙΝΌ  ΤΝΈ ΙΝΌ ΤΝΝΝΝΌ ³ Ί ΥΝ» ³ ΙΝΝΝΌ ΤΝΝΝΈ Ί
³ ΘΝΝΝ» ³  ΘΝΝ»   ³ Ί          ³ ΘΝΎ Ί ³ Ί     ΥΝΝΝΎ Ί
ΤΝΝΝΝΝΌ ΤΝΝΝΝΝΌ   ΤΝΌ          ΤΝΝΝΝΝΌ ΤΝΌ     ΤΝΝΝΝΝΌ
                     P R O v0.96α


Quick Installation Guide
ΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔΔ

1. Uncompress CPSP????.* into a directory. 

2. Add the Enviroment Variable "CPS" to one of your batch files which is
   run everytime your computer is restared.  If you have not already got
   the Ezycom Enviroment Variable set please add this also as it is vital
   to the setup program.

   If you are running the program from it's directory you do not have to
   specify a CPS variable as it will default to the current directory.

   eg.. Autoexec.bat
   ----<TEAR>------
   SET CPS=C:\EZY\CPSPRO
   SET EZY=C:\EZY
   ----<TEAR>------

3. Run CPSSETUP.EXE this program configures Ezy-CPS Pro and if a config
   file is not found it will give you a warning and then ask you if you
   wish to create a new one.

   *** NOTE *** If you have trouble running the program because of the screen
   fading which requires a VGA Card and monitor run CPSSETUP.EXE -NOFADE and
   this will disable all fading effects.

4. Most settings should be correctly detected and initialized, make certain
   the node/path setup is correct.  The general config is not as important
   as it contains mostly settings which are not vital to operation, but deal
   with how the statistics are displayed.

5. Run CPSPRO.EXE <NODE> and watch carefully for error messages.  If no
   error messages are encountered you are doing well, almost there.

   eg.
       CPSPRO    (Defaults to Node 1)
       CPSPRO 1  (For Node 1)
       CPSPRO 2  (For Node 2)

   If you encounter an error message it is normally due to an incorrect
   setting with either the enviroment variables or the Node/Path setup which
   is accessed through CPSSETUP.EXE

6. Add a option to display the ANSI/ASCII file to one of your menus.
   eg...
   Display: [1] Line 1 CPS Rates
   Data:    cps1
   Type:    45
   Hotkey:  1
   etc.. etc. etc...
   If you don't know how to do this reffer to your Ezycom manual.

6. Logon Locally and make sure the screen is displayed correctly.

7. Add CPSPRO to you maintainance event or into your batch file which runs 
   your BBS.  It is a good idea to make Ezycps run after each caller has 
   logged off for more up to date statistics.

8. Sit back relax and hope it all works :)
